Contract blasting in Möttingen
We blast, zinc-coat and paint your parts.
Sandblasting, thermal zinc spraying, priming and painting in one place: in our blasting and paint halls measuring 16 × 6 × 5 metres, we process workpieces of every size, from small to large.
- 16 × 6 × 5 mBlasting and paint halls
- 4 stepsBlasting, zinc spraying, priming, painting
- From small to largeFrom series parts to steel structures
- MöttingenBavaria, Germany
Our services
Everything in one place
Your workpieces go through every step in-house with us. You do not need your own blasting or painting facility.
- 1SandblastingRust, mill scale and old coatings are removed. The surface is clean and ready for corrosion protection.
- 2Thermal zinc sprayingZinc is thermally sprayed onto the blasted surface and protects the steel against corrosion.
- 3PrimingThe primer ensures good adhesion of the subsequent paint layers.
- 4PaintingThe top coat protects the workpiece and gives it its final appearance.
Thermal zinc spraying
Corrosion protection through thermal zinc spraying
In thermal zinc spraying, zinc is melted and sprayed with compressed air onto the previously blasted steel surface. This creates a zinc layer that protects the steel against corrosion.
At SAPI, zinc spraying takes place directly in the blasting hall, in the same room as the blasting. The parts can then be primed and painted.
What we process
All kinds of parts
Containers- Skips
- Truck frames
- Vehicle parts
- Fences and gates
- Wheel rims
- Stainless steel parts
- Industrial series parts
- Steel structures
From practice
1970 Dodge Charger on video
In the video, you can see how we sandblast the body of a 1970 Dodge Charger.
- 16 mLength
- 6 mWidth
- 5 mHeight
Our halls
Room for large workpieces
Quality
We ensure clean surfaces and the lasting value of your parts.
Modern and environmentally friendly
In our modern facilities we treat the surfaces of small and large parts.
From small to large
From series parts to steel structures: our halls are 16 m long, 6 m wide and 5 m high.
Your contact
We will gladly prepare a free quote for you
Send us photos, dimensions and quantities of your parts and tell us which treatment you need.
Sebastian Fertl · Sales & consulting (office)
Frequently asked questions
Questions about contract blasting
What does contract blasting mean?
With contract blasting, we blast your workpieces as a service in our halls in Möttingen. You do not need your own blasting system. On request, we then zinc-spray, prime and paint the parts.
Which parts do you process?
All kinds of parts, for example containers, skips, truck frames, vehicle parts, fences, wheel rims, stainless steel parts, industrial series parts and steel structures.
How large can the workpieces be?
Our blasting and paint halls are 16 m long, 6 m wide and 5 m high.
What is thermal zinc spraying?
In thermal zinc spraying, zinc is melted and sprayed onto the blasted steel surface. The zinc layer protects the steel against corrosion. We do this directly in the blasting hall.
Where is the work carried out?
At our plant in Möttingen, Enkinger Weg 4, 86753 Möttingen, Germany.
How do I get a quote?
Send us photos, dimensions and quantities of your parts via the form or by email, or give us a call. The quote is free of charge.
Would you like to blast yourself?
SAPI also builds the equipment for it: sandblasting halls, sandblasting containers and blasting machines.
We'll call you!
Use the form below and one of our specialists will call you.
Usually we will reply within one working day.
I would like to discuss: