CORE Sandblasting Hall — Ready When You Are.
The pre-configured sandblasting hall by SAPI. Clearly defined. Quickly available. Proven in practice.
Pre-configured
Three defined hall sizes — CORE I, II and III — pre-configured and ready to order.
Fully equipped
From sandwich panel construction to filter and abrasive recycling system to protective equipment — everything included.
Quickly available
Setup on existing concrete floor in your workshop. Connect compressed air and power — ready to operate.
Over 50 years of experience
SAPI has been building sandblasting systems since 1970. The CORE Hall is the result of decades of practical experience.
CORE Sandblasting Halls — Three Sizes, One Solution
The CORE Sandblasting Hall is available in three pre-configured sizes. Choose the right model for your requirements.
CORE I
5,9 × 3,47 × 3,2 m
| Filter | Schirocco PC4 |
| Air volume | 3.000 m³/h |
| Conveyor | 3×T1000 |
| Door | 3×3,3 m |
| Rubber | 69 m² |
| Electrical cabinet | 8 kW |
| LED | 2× 200W |
Price on request
CORE II
7,04 × 3,47 × 3,2 m
| Filter | Schirocco PC8 |
| Air volume | 6.000 m³/h |
| Conveyor | 3×T1000 |
| Door | 3×3,3 m |
| Rubber | 77 m² |
| Electrical cabinet | 10 kW |
| LED | 2× 200W |
Price on request
CORE III
7,04 × 4,17 × 3,2 m
| Filter | Schirocco PC8 |
| Air volume | 6.000 m³/h |
| Conveyor | 1×T1350 + 1×T1000 + 1×T1350 |
| Door | 3×4 m |
| Rubber | 82 m² |
| Electrical cabinet | 10 kW |
| LED | 2× 200W |
Price on request
Not sure which CORE model is right for you?
Our specialists will help you select the optimal CORE Sandblasting Hall for your requirements.
Video: The CORE Sandblasting Hall in Action
Structural & Electrical Components
The CORE Sandblasting Hall is constructed from high-quality sandwich panels for walls and ceiling, connected by precision steel sheet connection profiles.
Each CORE Hall features a double-wing door, an electrical cabinet to VDE standards (IP 54, 8–10 kW depending on model) and 2× LED ceiling lights with approx. 20,000 lumens (200 W). The entire wall surface is protected with a durable rubber lining (69–82 m² depending on model) against wear from blasting media.
The hall is set up on an existing, level concrete floor in an existing workshop. Compressed air and power supply (400V / 50Hz) are provided on site.
Automatic Abrasive Recycling System
The patented SAPI flat conveyor system ensures a fully automatic, closed abrasive recycling circuit.
Technical Data Comparison
CORE I · CORE II · CORE III
| Feature | CORE I | CORE II | CORE III |
|---|---|---|---|
| Length | 5,90 m | 7,04 m | 7,04 m |
| Width | 3,47 m | 3,47 m | 4,17 m |
| Height | 3,20 m | 3,20 m | 3,20 m |
| Door | 3×3,3 m | 3×3,3 m | 3×4 m |
| Rubber lining | 69 m² | 77 m² | 82 m² |
| Filter type | Schirocco PC4 | Schirocco PC8 | Schirocco PC8 |
| Air volume | 3.000 m³/h | 6.000 m³/h | 6.000 m³/h |
| Filter area | 40 m² | 80 m² | 80 m² |
| Filter cartridges | 4 | 8 | 8 |
| Residual dust content | < 5 mg/m³ | < 5 mg/m³ | < 5 mg/m³ |
| Filter motor power | 3 kW | 5,5 kW | 5,5 kW |
| Conveyor | 3×T1000 (á 5 m) | 3×T1000 (á 6,25 m) | 1×T1350+1×T1000+1×T1350 (á 6,25 m) |
| Electrical cabinet | 8 kW | 10 kW | 10 kW |
| LED lights | 2× 200 W | 2× 200 W | 2× 200 W |
| Blast pot | 100 l | 100 l | 100 l |
| Pressure range | 0,1–12 bar | 0,1–12 bar | 0,1–12 bar |
| Protection class | IP 54 | IP 54 | IP 54 |
| Voltage | 400V / 50Hz | 400V / 50Hz | 400V / 50Hz |
Scope of Delivery & Optional Upgrades
Each CORE Sandblasting Hall is delivered as a fully equipped kit — including all following components.
- ✓ Sandwich panels for walls and ceiling
- ✓ Connection profiles made of sheet steel
- ✓ Double-leaf door (3×3.3 m for CORE I/II, 3×4 m for CORE III)
- ✓ Electrical cabinet acc. to VDE (IP 54, 8 kW for CORE I / 10 kW for CORE II+III)
- ✓ 2× LED ceiling lights (~20,000 lumens / 200 W)
- ✓ Rubber lining (69 m² / 77 m² / 82 m² depending on model)
- ✓ Patented flat conveyor system — T1000/T1350 longitudinal conveyor + T600 cross conveyor
- ✓ Standard grating as grate floor
- ✓ Bucket elevator for vertical blasting media transport
- ✓ Blasting media silo as storage container
- ✓ Blasting media cleaner with vibrating screen
- ✓ SAPI cartridge filter “Schirocco” — PC4 (CORE I) or PC8 (CORE II/III)
- ✓ Impact pre-separator for coarse dust separation
- ✓ Connection nozzle for external connection
- ✓ 2× supply air grilles for controlled fresh air supply
- ✓ Residual dust content < 5 mg/m³
- ✓ SAPI Premium precision blasting unit 100 l — TÜV-certified
- ✓ Pressure range 0.1–12 bar, 1¼” piping
- ✓ 10 m long-life blasting hose ø25/40
- ✓ Silicon carbide nozzle 8 mm
- ✓ High-performance water separator (maintenance-free)
- ✓ Sandblasting helmet RED 2 — CE-approved, foam cushion, improved noise reduction
- ✓ Breathing air hose 10 m
- ✓ Activated carbon filter SAF
- ✓ SAPI blasting overall (nylon/cotton)
- ✓ Blasting gloves (5-finger leather)
- ◆ Rail system + transport trolley (max. 2 t load capacity)
- ◆ Rail extension up to 4 m in front of the hall
- ◆ Post-filter EU Class 6 — return air to workshop (residual dust < 2 mg/m³)
- ◆ Additional cartridge filter Schirocco PC1 for blasting media cleaner
Frequently Asked Questions
What distinguishes CORE I, CORE II and CORE III?
CORE I (5,9 m) ist die kompakteste Version mit PC4-Filter (3.000 m³/h). CORE II (7,04 × 3,47 m) bietet mehr Length und einen leistungsstärkeren PC8-Filter (6.000 m³/h). CORE III (7,04 × 4,17 m) ist die größte Version mit zusätzlicher Width, einem größeren Door (3×4 m) und breiteren Conveyorn (T1350).
Can the hall be set up outdoors?
No. The CORE Sandblasting Hall is designed for installation on a level, load-bearing concrete floor in an existing workshop.
Can I integrate a crane in the CORE Sandblasting Hall?
No — the CORE Hall is designed without crane rails. As a practical alternative, we offer a trolley (at extra cost), allowing workpieces to be easily and safely moved into the hall.
What do I need to provide on site?
Compressed air and power supply (400V / 50Hz), level concrete floor, adequately dimensioned supply lines and storage and transport facilities.
Which blasting media is the hall suitable for?
All dry, fine-grained, mineral blasting media — corundum, glass beads, steel grit, quartz sand and more.
What is the delivery time?
The delivery time is individually agreed upon after order placement.
What warranty applies?
12 months from delivery for single-shift operation (8 h/day), according to VDMA conditions. Wear parts are excluded.
Interested in the CORE Sandblasting Hall?
Request your personal quote now. Our team will advise you on CORE I, CORE II, CORE III and all optional upgrades.
Download our SAPI Catalogue
SAPI SAPI Katalog
We will call you!
Use the form and one of our specialists will call you.
We usually respond within one business day.
I would like to discuss: