Premium precizno pjeskarenje | 25 litara | sa Quick-STOP sigurnosnim uređajemPrecizan stroj za pjeskarenje pod niskim tlakom

SAPI-stroj sa niskim pritiskom/meko peskanje posebno je prikladan za nježno površinsko čišćenje i neprestano se podešava od 0,1 – 8 bara pritiska.

SAPI-stroj za meko peskiranje dokazan je na mnogo načina za obnavljanje povijesnih građevina poput zidanja od prirodne opeke i zidanja opeke, kao i na konstrukcijama građevnih figura,..itd.

SAPI stroj za meko peskiranje pod niskim pritiskom standardno je opremljen VARIO tehnikom blagog pjeskarenja – mlaznica i može se optimalno koristiti u tri različite tehnike pjeskarenja.

Novi uređaj za pjeskarenje PREMIUM dokazao je i usavršio uređaj za brzo zaustavljanje u malom kompaktnom dizajnu.

Zbog uređaja za brzo zaustavljanje, tlak unutar stroja se ne gubi tijekom pauze ili u slučaju da morate prilagoditi radni komad.

Čim želite ponovo započeti pjeskarenje, jednostavnim pritiskom na tipku stroj je 100% spreman bez gubitka tlaka, štedi vam vrijeme i novac.

A u slučaju nužde (mlaznica je ispuštena, ..) sustav za brzo zaustavljanje će reagirati i za 1-5 sekundi zaustavljanje pjeskarenja će se zaustaviti.

Također se smanjuje ili sprečava štetna kondenzacija materijala pri korištenju komprimiranog zraka visokog pritiska u posudi za pjeskarenje.

Brze informacije

0

Min. Pritisak

0

Maks. Pritisak

0

Volumen

0

Težina

Whirl stream-, flat stream- or Venturi stream principle.

This new variation potential of 3 blasting techniques open up an almost unlimited area of operations as well as by low-, middle- and high pressure.

The application can be done by dry- humid- or wet processing, it depends upon a field of application.

Concerning this kind of technique, in many cases, one can renounce on environmental-damaging chemicals. So, you can contribute to protecting the environment.

  • Fastest off and switch-on times, whereby the regulations of the professional associations are kept. (VBG 48)
  • The pressure adjustment can be exactly adjusted for the real blasting work, from 0,1 – 8,0 bar continuously adjustable regulated..
  • Lower blasting material consumption, since the pressure vessel remains permanent under pressure, and thus no unnecessary follow-up movement of blasting material affected.
  • By a respawn start the full blasting pressure is immediately present at the nozzle and does not build up slowly, thereby the lowering the blasting material consumption and with this lowering the abrasion by the blasting hose.
  • No humidity formation (condensate) in the vessel, since the vessel remains constant under pressure, and will not be by with each start and stop deaerated and aerated. By this procedure at the same time still different advantages result as follows:
  • Optimal blasting material metering with a hardened fine metering valve
  • Lower compressed air requirement, thereby high lowering of the fuel consumption (Diesel)
  • One-man handling, since the blasting pressure will be constantly indicated by the vessel pressure and can be changed simply at the manometer, without starting before.
  • No interference unit parts as control valves, membrane and seals, thereby uncomplicated maintenance and reliable in operation. It is only to be controlled the blasting hose at the quick stop safety device and exchanged if necessary (control from the outside anytime possible!).

Specific fields of application:

In the protection of historical monuments–restoration of natural stone, metals and wooden surfaces. The new PREMIUM fine blasting device allows perfect gradual cleaning with preservation of the patina. Furthermore, different surfaces can be matted, polished and deburred. A special field of application is the removal of flue gas condensate in post-fire restoration. Here high sensitivity is asked for and very sensitive blasting devices like our new Sapi PREMIUM fine blasting device are the perfect fit.

Cleaning of:           

Sandstone, lime-sand-stone, shell limestone, marlstone, greywacke granite, tuff stone, marble, travertine, marl, Keene’s cement, granite, foam mortar, exposed aggregate concrete, brick, ceramic, clinker, glass, Plexiglas, aluminium, iron, stainless steel, wood, plastics, fire damage, i.e.

Applications:

  • Restoration of monuments – gradual cleaning with preservation of the patina
  • Fire damage renovation (carefully removing flue gas condensate)
  • Graffiti removal on different materials and surfaces
  • Facade cleaning: stone, brick, plaster, concrete and wood surfaces
  • Dispersion paint on brick-facade, plaster etc.
  • Incrustations on ceramics or tiles, glazed and non-glazed
  • and many other applications

For gentle surface treatment we recommend the following fine-sand-blasting-media:

  • Glass powder flour fine: 0,09 – 0,25 degree of hardness acc. to Moh’s 6 – 6,5
  • Calcite powder flour (stone powder flour) 0,01 – 0,02 mm acc. to Moh’s 3,5
  • Garnet sand 0,04 – 0,1 mm acc. to Moh’s 8

For normal sand blasting works we recommend all commercial sand blasting media,

as for example:  Cinders, Cast shot, Steel grit, Corundum, Glass pearls etc.

Volume:25 Liter
Height:820  mm
Diameter of tank:260 mm
Total diameter:600  mm
Weight:ca. 45  kg
Fixed tubes inside and outside:½ “

Kontaktirajte nas ili nam pošaljite upit.

Zanima Vas Premium stroj za pjeskarenje od 25 litara?

Open chat
Willkommen bei der SAPI GmbH.
Benötigen Sie Hilfe oder zusätzliche Informationen?