T-REX 100 | Injector and pressure sandblasting cabinPressure / Injector Sandblasting cabin

  • Universal applicable Combi-Blasting cabin for economical, highest efficiency
    effectuation for all blasting operations
  • Suitable for all current types of blasting material
  • From practitioner developed highly robust Section-door-system for greatest durability
    and leak tightness.
  • Compact, transportable design with an integrated filter unit
  • Extremely bright, glare-free illumination of the blasting cabin-Inside room
  • Extremely economical Price-performance ratio

Schnelle InformationStrahlraum-Innenmaße

0

Height

0

Width

0

Depth
  • Injector- and pressure blasting process combined in one blasting cabin “selectable at push of a button”
  • Extremely robust, heavy loading capacity construction (max. 500 Kg) with excellent section door front loading trough forklift or crane.
  • Sandblasting vessel is pneumatically controlled.
  • Highly efficient blasting work through low consumption of compressed air and blasting material separator by the cascade-pre filter technology.
  • The blasting heads are standard equipped with boron carbide blasting nozzles.
    ( Lifespan approx. 800 – 1000 working hours)
  • Using of 2 Pieces dust filter cartridges – each with 10 m² filter area = total filter area 20 m²
  • Extremely low power input through innovatively fan technology with highest air capacity
  • Light wear rubber lining in the blasting room
  • Portable under run construction by hand lift truck
  • After filter (Policefilter) for air recirculation process, residual dust <2,0 mg/m³
  • Frequency control cartridge filter for variable regulation of the suction output
  • Automatic dust filter-dedusting by „Jet-dedusting“ via pressure air from the separate pressure tank.
  • Attached manual or automatic rotary table
  • Opening for a large sandblasting material piece (30 x 30 cm)
  • Attached rotary basked 20 ltr capacity.
  • Rotational speed is variable and adjustable (work time)
  • Microblast-blasting unit for work of small and finest work pieces mounted on the housing of the unit
  • Installed pressure air-blow

Dimensions:

Height2050 mm
Width1350 mm
Depth1450 mm

Internal sandblasting dimensions: 

Height850 mm
Width1000 mm
Depth800 mm
Arm set
Schwenkarm-Set

Would you like to fix the sandblasting nozzle in the sandblasting cabin and guide your component with both hands?

Rotary table ø 600 mm
Drehkorb-Arbeitsrost

up to 200 kg load capacity, manual handled

Automatic rotating basket
Automatischer Drehkorb

Ø approx. 400 mm, loading of the basket: approx. 10 – 15 kg, with infinitely variable speed control, timer and blasting head holder for processing small, pourable parts.

Automatic Rotary table
Automatischer-drehteller

Ø 600 mm, up to 200 kg load capacity, with variable speed control, timer clock and blasting head fastener

Rotary table ø 500 mm
Drehkorb

up to 40 kg load capacity, manual handled

Frequency control cartridge filter
Frequenzregelung-Patronenfilter

for variable regulation of the suction output

Rotary table ø 600 mm
Drehkorb-Arbeitsrost

up to 200 kg load capacity, manual handled

Lateral passing through openings
Seitliche durchschiebeoffnungen

ideal for large parts that have to be pushed through the cabin while blasting

Turntable ø 850 mm, extendable
Drehteller herausfahrbar

The turntable can be pulled out about half way and is operated manually. Maximum load capacity is 160 kg

Assembly trolley including turntable ø 600 mm
Bestuckungswagen drehteller

up to 200 kg load capacity, manually operated, the turntable with the pick-and-place trolley can be moved in front of the cabin and then pushed into the blasting chamber.

Odsávacie zariadenia s patrónovými a taškovými filtrami

V prípade ze máte otázky nás neváhajte kontaktovať.

Interested in T-REX 100sandblasting cabin?

Open chat
Willkommen bei der SAPI GmbH.
Benötigen Sie Hilfe oder zusätzliche Informationen?